The CD-200 offers a simple, cost-effective solution to installations or PA rental where the extra features of a more complex CD player might go unused. Yet it provides features such as pitch control with an on/off knob, a headphone output with level control, intro check, anti-shock memory, and a variety of convenient playback modes which can help prevent the user from making a mistake. The CD-200 can also play back MP3 and WAV files from data CDs and display ID3 tags and CD-Text. The included wireless remote control gives access to most features and allows a track to be selected directly via a 10-key pad.
The CD-200i has has all of the CD-200’s features plus an additional iPod dock to play files directly from an Apple iPod. It is further equipped with iPod video and s-video outputs as well as an additional stereo line input on the front for other sources.
Tascam CD-200 and CD-200i: Simple, convenient and reliable!
CD-200i additional features
| General | ||
|---|---|---|
| Compatible discs | CD-R/CD-RW (12-cm/8-cm) | |
| Formats | CD-DA, CD-ROM (ISO 9660 Level 1, 2, 3 JOLIET Romeo UDF 1.5), MP3, WAV | |
| MP3 playback specifications | ||
| Audio Mode | Stereo/Joint Stereo/Dual Channel/Mono/VBR MPEG1 Audio Layer III (MP3) |
|
| Sampling frequency | 32 kHz/44.1 kHz/48 kHz | |
| Bit rate | 32–320 Kbit/s | |
| WAV playback specifications | ||
| Sampling frequency | 8 kHz/11.025 kHz/12 kHz/16 kHz/22.05 kHz/24 kHz/32 kHz/44.1 kHz/48 kHz | |
| Quantization bit rate | 8-bit/16-bit | |
| CD-DA playback specifications | ||
| Sampling frequency | 44.1 kHz | |
| Quantization bit rate | 16-bit | |
| Number of channels | 2 (Stereo) | |
| Audio performance | ||
|---|---|---|
| Frequency response | 20 Hz - 20 kHz ±1.5 dB | |
| Signal-to-Noise Ratio (S/N) | > 90 dBA (20 kHz LPF) | |
| Distortion (THD+N) | < 0.01% (1 kHz: 20 kHz LPF) | |
| Dynamic range | 90 dB min. | |
| Channel separation | 90 dB min. (1 kHz, 1 kHz BPF) | |
| Audio outputs | ||
|---|---|---|
| Analogue output unbalanced | RCA pin jacks | |
| Nominal output level | –10 dBV | |
| Maximum output level | +6 dBV | |
| Output impedance | 200 Ohm | |
| Headphones output | Standard stereo jack | |
| Nominal output power | 20 mW + 20 mW min. (When monitoring CD, THD+N: 0.1% max., 32 Ohm load) |
|
| Coaxial digital output | RCA pin jack | |
| Compatible signal format | IEC-60958-3 (SPDIF) | |
| Output impedance | 75 Ohm | |
| Optical digital output | Fibreoptic connector | |
| Compatible signal format | IEC-60958-3 (SPDIF) | |
| Other inputs and outputs (CD-200i only) | ||
|---|---|---|
| Aux input unbalanced | 3.5-mm stereo mini jack | |
| Nominal input level | –16 dBV | |
| Maximum input level | 0 dBV | |
| Input impedance | 22 kOhm | |
| Video output | RCA | |
| Signal format | Composite video | |
| Output impedance | 75 Ohm | |
| S-Video output | 4-pin mini-DIN connector | |
| Signal format | Separate Video signal | |
| Power supply and other specifications | ||
|---|---|---|
| Power requirements | AC 120 V, 60 Hz (USA/Canada) AC 230 V, 50 Hz (UK/Europe) AC 240 V, 50 Hz (Australia) |
|
| Power consumption | 12 W | |
| Operating temperature range | +5 °C to +35 °C | |
| Inclination of installation | 5 degrees or less | |
| Dimensions (W x H x D) | 481 mm x 95 mm x 298 mm | |
| Weight | CD-200: 4.2 kg CD-200i: 4.7 kg |
|
Design and specifications subject to change without notice.
© 2006–2010 Tascam Division · TEAC Europe GmbH
All rights reserved.
This page last updated: