PORTASTUDIO 30th Anniversary
Tascam US-1800

The US-1800 is a single-rackspace USB 2.0 Audio/MIDI interface packed with I/O: 16 inputs and four outputs can be used simultaneously, making it ideal for live performance recording.

The US-1800 has eight studio-quality microphone inputs with phantom power, two line/instrument switchable inputs on the front, four additional balanced line inputs on the rear, overload indicators for each input, four line-level outputs, digital SPDIF I/O (output switchable to AES/EBU), independent monitor and headphone outputs with separate level controls and 16 channels of MIDI I/O. It offers zero-latency hardware monitoring and sampling rates up to 96kHz at 24-bit resolution. Cubase LE 5 is supplied as standard.

Main Features

  • Provides 16 audio inputs and 4 audio outputs plus one MIDI input and output for a Windows or Macintosh computer
    • 8 mic/line inputs with phantom power (switchable for 4 channels each) and level indicators on front panel
    • Two 6.3-mm balanced line/instrument inputs on front
    • Four more balanced line inputs on rear panel
    • Four line outputs
  • Up to 96 kHz sampling rate at 24-bit resolution
  • Separate stereo 6.3-mm monitor output
  • Stereo digital I/O (input: SPDIF, output: switchable between SPDIF and AES/EBU)
  • Analogue and digital inputs can be used simultanuously
  • 16-channel MIDI I/O
  • Separate monitor and headphone level controls
  • Zero-latency hardware monitoring
  • USB 2.0 interface
  • Steinberg Cubase LE 5 (Mac/PC) included
  • 1-U rackmount chassis

Specifications

Analogue inputs and outputs
Mic inputs 1–8 XLR-3-31
  Type and wiring Balanced (1: ground, 2: hot, 3: cold)
  Input impedance 2.2 kOhm
  Input level –58 dBu (max. Gain) to –2 dBu (min. Gain)
  Maximum input level +14 dBu
Line in/Guitar inputs 9–10 6.3-mm phone jack
 LINE IN/GUITAR switch set to LINE IN
  Type and wiring Balanced (Tip: hot, Ring: cold, Sleeve: ground)
  Input impedance 10 kOhm
  Nominal input level –42 dBu (max Gain) to +4 dBu (min. Gain)
  Maximum input level +20 dBu
 LINE IN/GUITAR switch set to GUITAR
  Type Unbalanced
  Input impedance 700 kOhm
  Nominal input level –52 dBV (max Gain) to –6 dBV (min. Gain)
  Maximum input level +10 dBV
Inputs 11–14 6.3-mm phone jack
  Type and wiring Balanced (Tip: hot, Ring: cold, Sleeve: ground)
  Input impedance 10 kOhm
  Nominal input level +4 dBu or –10 dBV
(selectable with the LEVEL switch)
  Maximum input level +6 dBV / +20 dBu
Line outputs 1–4 6.3-mm phone jack
  Type and wiring Balanced (Tip: hot, Ring: cold, Sleeve: ground)
  Output impedance 100 Ohm
  Nominal output level +4 dBu
  Maximum output level +20 dBu
Monitor output (L/R) 6.3-mm phone jack
  Type and wiring Balanced (Tip: hot, Ring: cold, Sleeve: ground)
  Output impedance 100 Ohm
  Nominal output level +4 dBu
  Maximum output level +24 dBu
Phones output 6.3-mm stereo phone jack (Tip: L, Ring: R, Sleeve: ground)
  Maximum output level 50 mW + 50 mW (32 Ohm, 1 kHz, 1 % distortion)
Digital inputs and outputs
Digital input RCA
  Signal format IEC 60958-3 Consumer (SPDIF)
  Level 0.5 Vpp at 75 Ohm
Digital output RCA
  Signal format Software-selectable between IEC 60958-3 Consumer (SPDIF) and IEC 60958-3 Professional (AES/EBU)
  Level 0.5 Vpp at 75 Ohm
Other inputs and outputs
MIDI input 5-pin DIN connector (standard MIDI format)
MIDI output 5-pin DIN connector (standard MIDI format)
USB connector USB Series B connector
  Format USB 2.0
Audio performance
Sampling rate 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Quantization bit rate 16/24-bit
Frequency response 20 Hz - 20 kHz ±1 dB (44.1/48 kHz)
20 Hz - 40 kHz +1/–3 dB (88.2/96 kHz)
(MIC IN to LINE OUT, Gain knob at min., JEITA)
Signal-to-noise ratio 96 dB or more
(MIC IN to LINE OUT, Gain knobs at minimum, 44.1 kHz, JEITA)
Total harmonic distortion <0.01 %
(MIC IN to LINE OUT, Gain knobs at minimum, JEITA)
System requirements
Windows  
  Supported operating systems Windows XP, 32 bit or 64 bit, SP2 or later
Windows Vista, 32 bit or 64 bit, SP2 or later
Windows 7, 32 bit or 64 bit
  Supported computer systems Windows compatible computer with a USB port (USB 2.0 is recommended)
  CPU/clock Pentium 4 1.4 GHz or faster
AMD Athlon 1.4 GHz or faster
or equivalent processor
  Memory 1 GB or more
Macintosh  
  Supported operating systems Mac OS X 10.6.3 or later
  Supported computer systems Apple Macintosh series equipped with a USB port as standard equipment
  CPU/clock Intel processor
  Memory 1 GB or more
Other specifications
Power supply AC adapter Tascam PS-1225L
Input voltage 100–240 V AC, 50–60 Hz
Output voltage 12 V DC, 2 A
Power consumption 7.2 W
Overall dimensions (W x D x H) 483 mm x 280 mm x 44 mm
Weight 3.1 kg
Operating temperature range 5–35 °C

Design and specifications subject to change without notice.

This page last updated:

Last modified: 2010-11-08 12:20:46 UTC